JNCIS-E PDF Print E-mail

E-series Routing Protocols (24hrs)

Course Overview

This course is designed to provide technical network professionals with the skills they need to be able to successfully install, configure, and troubleshoot the E-series router in a dedicated access network running various routing protocols. The course covers the fundamentals of PPP, POS, ATM, VLANs, OSPF, IS-IS, BGP4 as well as E-series system administration. The course consists of over 50% hands-on exercises.

Objectives

After successfully completing this course, you should be able to:

* Configure PPP, POS, Ethernet, ATM, and VLAN interfaces on the E-series router;
* Configure the E-series router for OSPF;
* Configure the E-series router for IS-IS;
* Configure the E-series router for BGP; and
* Describe fundamental E-series system administration tasks.

Intended Audience

This course is intended for technical network professionals responsible for the integration, configuration, and management of E-series router networks.

Course Level

This is an intermediate-level course designed to provide a strong foundation for configuring and troubleshooting various routing protocols on an E-series router.

Prerequisites

The prerequisites for the E-series Routing Protocols course are knowledge of IP in an ISP environment and the Introduction to Juniper Networks Routers-E-series course.

Course Contents

Course Introduction

Interface Configuration

* The E-series Router in a Dedicated Access Environment
* Configuring and Verifying IP-over-Ethernet Interfaces
* Verifying IP-over-HDLC POS Interface

OSPF Overview

* OSPF Operation and Single-Area Configuration

IS-IS Overview

* IS-IS Overview
* IS-IS Protocol Operation
* IS-IS Configuration and Verification

BGP Overview

* BGP Overview
* Basic BGP Configuration
* Influencing Traffic Flow
* Modifying BGP Path Attributes

System Administration

* Upgrading and Downgrading Software
* Backup Boot Configuration and Slot Configuration
* Rebuilding Flash Cards and Password Removal
* Solutions 1 and 2
* Accessing the CLI
* Other System Administration Tasks